All Reset - Olympus UFL-2 Manual De Instrucciones

Setup mode
ISO, F
communication
in AUTO mode
• Available only
in AUTO
mode, with
cameras with
communicatio
n capability.
ISO sensitivity
selection in
AUTO mode
• Works with a
camera
without
communicatio
n capability.
Also works
with a camera
with
communicatio
n capability
when the
ISO, F
communicatio
n is set to
[OFF].

All reset

All reset resets the custom setups to the factory default settings.
1 Press the MODE and LIGHT buttons simultaneously for 2 or more seconds
to reset to default settings.
• The distance display unit (m/ft) is not altered by the all reset
operation.
Mode display Value display
MODE button
Function
Dial
The ISO sensitivity
and aperture value
setup will be
adjusted
automatically by
the camera.
You can adjust the
ISO sensitivity and
aperture value on
the electronic flash.
The ISO sensitivity
can be set with the
dial.
LIGHT button
MODE button
Default
value
on
EN
100
EN 29