Features - Tripp-Lite SRCOOLNET2 Guía De Instalación E Inicio Rápido

Features

C1 C2
RESET
15-02-247-93342E.indb 13
PS/2 Port: Use this port to connect the Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Note: Do not connect a
keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal
connection to a computer with a terminal emulation program.
A configuration cable (part number 73-1025) is included with the
SRCOOLNET2. If you need to order a replacement cable, visit
www.tripplite.com/support.
RJ45 Ethernet Network Port: Use this RJ45 jack to connect the
SRCOOLNET2 to the network with a standard Ethernet patch cable.
The Link LED C1 and Status LED
conditions, as shown in the table below. Does not support PoE
(Power Over Ethernet) applications.
SRCOOLNET2 Operating Conditions
C1 Link LED Color
Off
Flashing Amber
Flashing Green
C2 Status LED Color
Off
Steady Green
Flashing Amber
SNMP Reset Button: Press the reset button for 3 seconds to
reboot the SRCOOLNET2. Rebooting the SRCOOLNET2 will not
erase network settings or power. Note: The recessed button is
located beneath the Ethernet port. Use a pin, paper clip, or pointed
tool to access the button. Do not use excessive force when
engaging the button.
C2 indicate several operating
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
SRCOOLNET2 Not Initialized
SRCOOLNET2 Initialized and Operational
Error - SRCOOLNET2 Not Initialized
13
4/9/2015 9:52:09 AM