Descargar Imprimir esta página

Connecting The Power - Duronic BFH20 Manual De Instrucciones

Ocultar thumbs Ver también para BFH20:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
Operation

Connecting the Power

The main power ON/OFF (0/I) switch is located on the back of the heater.
To connect the power supply to the heater, push this switch to the ON (I) position.
There is a "D" sound and the screen will display in full for 3 seconds,
then heater enters into standby mode.
If you wish to disconnect the power supply,
push ON/OFF (0/I) button again and switch to OFF (0).
Reading the Digital Display
On/ Standby
Power setting
Window open detection
Timer
Icon
Referred to in manual as
Full Sun Icon
Half sun Icon
Snowflake Icon
Window Icon
Timer Icon
[ ]
Child Lock Icon
d1
D1
d2
D2
d3
D3
d4
D4
d5
D5
d6
D6
d7
D7
Program
Modes: P1/ P2/ P3/ P4/ P5/ UP
Up arrow: timer/ temperature
Down arrow: timer/ temperature
LED Display
Meaning
Working at full power = 2000W
Working at half power = 1000W
Anti-Frost Function
Window open detection function
Reverse timer function
Child lock function
Day 1/ Monday
Day 2/ Tuesday
Day 3/ Wednesday
Day 4/ Thursday
Day 5/ Friday
Day 6/ Saturday
Day 7/ Sunday
8
Setting up the heater
Buttons
Reffered to in manual as
On/ standby button
Mode button
Program button
Power setting button
Up-arrow button
Down-arrow button
Timer button
Window open detection button
1.
Turning the Heater On and Off
To switch on the fan heater, press the on/standby button once.
t will immediately power on and you will hear it running, and it will start to blow out warm air.
OFF: To switch the heater off again, press the same on/standby button to put it into standby mode.
2.
Set the current day and time
Set the day of the week
a)
Switch the heater on.
b)
Long-press the timer button for 3 seconds.
c)
The screen will first display
d1
and start to flash.
d)
Press the up-arrow or down-arrow to set the day of the week
it currently is from d1, d2, d3, d4, d5, d6, d7.
e)
After selecting the day, press the timer button once to confirm.
Set the clock
f)
Next, the heater enters into the time/clock setting.
A numbered digit flashes on the screen.
g)
Set the hour: Press the up-arrow button or down-arrow button to set the
current correct hour among 00-23 in the cycle.
h)
When you have chosen the hour, press the timer button once to confirm.
i)
Set the minutes: Press the up-arrow button or down-arrow button to set the
current correct minutes from 0-59.
j)
Press the timer button once to confirm.
k)
Finally, when both the hour and minutes have been set,
press the timer button once to confirm and save the settings.
After setting the time, allow the digital screen to return back to the standard screen.
To check if the current day and time is set currently, press the timer button once; the screen will
automatically show the information in this order: Day, Hour, Minutes in turns within 1 second of each
other, then, the screen will switch back to the ambient temperature display.
9

Publicidad

loading