Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Setting the power level
Changing from full power to half power (2000W to 1000W):
a)
Switch on the heater.
b)
The screen will display the
full sun icon
work at 2000W.
c)
To change the power level to half-power, press the power setting button once.
This will change from the
full sun icon
d)
Do nothing more and after a few seconds it will automatically save the setting for you.
e)
To switch it back to full-power, follow the same steps.
4.
Setting the temperature
Straight after setting the power level, set the temperature.
a)
Press the up-arrow button or down-arrow button to customise the temperature setting.
b)
Select a temperature between 5°C and 35°C.
As soon as you land on the number you wish to select, do nothing more and after 5 seconds
it will automatically save the setting for you.
5.
Selecting a pre set mode
To help you manage the heat in your home, there are 6 different modes to choose from.
Each have a pre-set pattern to program the heater to go on and off throughout the day.
•
P1, P2, P3, P4, P5
are the factory default programs that have already been set for you. Each
follows a different pattern to accommodate for a range of preferences.
Please see the chart below for more information on this.
•
UP
is the program that you can customise to set a working period/mode to suit your
requirements.
Pre-Set Modes
Per Week
Program
Anti
Comfort
Anti
Mode
frost
frost
Days (1-7)
P1
00:00-
24:00
Days (1-5)
P2
00:00-
06:30-
08:30-
06:30
08:30
17:00
Days
P2
00:00-
07:30-
10:00-
(6-7)
07:30
10:00
12:00
Days (1-5)
P3
00:00-
06:00-
17:00-
06:00
17:00
24:00
Days
P3
00:00-
(6-7)
24:00
Days (1-7)
P4
00:00-
06:00-
22:00-
06:00
22:00
24:00
Days (1-7)
P5
00:00-
24:00
which means it is on full-power mode and will
(2000W) to the
half sun icon
(1000W).
Comfort
Anti
Comfort
Anti
Best suited for
frost
frost
Consistent all-day
comfort; for everyday use
continuously.
17:00-
22:30-
Ideal for family who work on
22:30
24:00
weekdays and at home on
weekends.
12:00-
14:00-
17:00-
22:30-
14:00
17:00
22:30
24:00
Ideal for in an office where it
is occupied during weekdays
and empty on the weekend.
Ideal for a commercial place
where it is occupied all day.
Constant anti-frost, ideal
for family who go out for a
long time.
10
* *Anti-frost: default mode to keep the room at a temperature of at least 5 to prevent frost.
* *Comfort: this setting is customised by the user when they set up their heater.
To select a mode
•
Switch on the heater.
•
Press the mode button to select a pre-set mode from
6.
Timer setting
This is an option to set a countdown timer to switch off the heater after a certain amount of time. For
instance, if you set it for 2 hours it will stay on for this time and then switch off into standby mode
automatically.
Set the Timer
a)
Press the mode button and select P1.
b)
Press the timer button quickly two times. The timer icon will flash on the screen.
c)
Press the up-arrow button or down-arrow button to select an amount of time you would
like the heater to be on for. You can choose from 1-24 hours.
d)
Stop on the number you want to select and do nothing else. After 5 seconds it will
automatically save the setting.
The timer icon will stop flashing and appliance will then start a countdown to turn the heater off.
Cancel the Timer: If you want to cancel the timer setting, press the timer button twice quickly again.
The
timer icon
will disappear from the screen to confirm that it has been cancelled.
7.
Setting the customised Program (UP)
You can set your own customised program for the heater to come on and off at specific times
throughout the day. In the
UP
mode you can set one, two or three periods of time per day for the
heater to go on and off (in comfort mode). Remember, 'comfort mode' is the power/temperature that
you set at the beginning. It can be changed by following the steps in section no.3.
a)
Switch the heater on.
b)
Press the mode button and select the
c)
Press the program button.
d)
The screen will display d1 to begin setting for the first day of the week.
You can start here or select a different day to program if you wish to skip this day.
e)
On your chosen day, press the up-arrow button or down-arrow button once to set the
times for the 1st working period for this day;
the screen will display d1 and the
f)
Press the up-arrow button or down-arrow button once again to select the start time.
g)
Select an hour (between 0 to 23) when you would like the heater to switch on. When you
have the correct hour selected, press the timer button to confirm.
h)
The screen will then prompt you to set a finish time.
P1, P2, P3, P4,
P5, UP in cycle.
UP
mode.
full sun icon
will flash.
11
Publicidad
