Publicidad
Idiomas disponibles
Idiomas disponibles
TILT WALL MOUNT FOR LCD, PLASMA, and LED DISPLAYS
English
SPECIFICATIONS
Display Size: 37" to 65"
Maximum Load: 75 kg (165 lbs)
Mounting Pattern: 800 mm x 500 mm (31.5" x 19.7") max
Tilt Range: up to 15° down
Profile: 7.2 cm (2.8")
BOX CONTENTS
Wall Plate (x1)
Mount Arm (x2)
Safety Rod (x1)
Instruction Manual (x1)
Hardware Kit (x1)
WARNINGS
1.
R Read these instructions before you begin. If you are unsure of any part of the process, contact a
professional contractor or installer for assistance. Improper installation can result in injury or damage
2.
The wall or mounting surface must be capable of supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3.
Locate pipes, wires, or any other hazards in the wall where you wish to install the mount before
drilling
4.
Safety gear and proper tools must be used. Failure to do so can result in injury or damage.
5.
Two people are recommended for installation. Do not attempt to lift a heavy display without
assistance.
6.
Follow all instructions and recommendations regarding adequate ventilation and suitable locations for
mounting your display. Consult the owner's manual for your particular display for more information.
CAUTION: This wall mount is intended for use only with the maximum weight of 75 kg (165 lbs). Use with
heavier than the maximum weights indicated may result in instability causing possible injury.
TOOLS REQUIRED
Phillips Head Screw Driver
Ratchet or Driver with 13 mm (1/2") Socket
Electric or Portable Drill
6 mm (1/4") Drill Bit and Stud Finder for Drywall Installation
10 mm (3/8") Masonry Bit for Concrete Installation
2
RMS-MT6020 User Manual
Publicidad
