Descargar Imprimir esta página

Technical Data - Sulzer ABS CA 511 Guia De Instalacion

Publicidad

Graphical operator interface type ABS CA 511, Installation guide
2

TECHNICAL DATA

2.1
Technical data CA 511
Ambient operation temperature
Ambient storage temperature
Degree of protection assembled in
cabinet from outside
Degree of protection from rear side
Humidity
Power supply
Power consumption
Installation category
Flame rated
Display
Keyboard
Led indicators
Pollution degree
Max altitude
Approval
2.2 Cleaning
How to clean the unit
Only front side shall be cleaned by using a dry, soft cloth. A good choice would
be the microfiber type of cloth and gently wipe the CA 511 in order to not scratch
the display or the overlay. If the dry cloth did not completely remove the dirt, do
not press harder in an attempt to scrub it off. If necessary, moisten the cloth by
adding a small amount of water with thin solution of mild detergent and try again.
Never use detergent with polish or solvent which can have an impact of the plastic
surface.
5
-20 to +50°C
(-4 to +122°F)
-30 to +80°C
(-22 to +176°F)
IP 65, NEMA: Type 4
IP 20, NEMA: Type 1
0-95 % RH none condensing
9-34 VDC, SELV or Class 2
< 3.0 W
CAT II
V0 (E45329)
10.92 cm (4.3 inch) colour TFT 480x272
28 keys
2
2
2000 m
EN

Publicidad

loading