Product Description; System Description; Technical Data - geberit Monolith Plus 131.231.SI.5 Manual De Instrucciones

Product description

System description

The sanitary module is equipped with user
detection, an odour extraction unit and an
orientation light.
Soft-touch buttons are integrated in the
cistern lid and can be used to release a large
or small flush or activate the odour
extraction unit.
The integrated odour extraction unit
neutralises unpleasant odours in the WC
ceramic appliance.

Technical data

Nominal voltage
Mains frequency
Operating voltage
Power consumption 5 W
Power consumption
standby
Mains connection
Flow pressure range 10–1000 kPa
Flush volume factory
setting
The button functions may be
temporarily blocked due to high
electrostatic discharges.
B1111-003 © 07-2014
966.319.00.0 (02)
100–240 V AC
50–60 Hz
4.1 V DC
< 0.5 W
Direct connection
via system plug with
flexible 3-wire
plastic-sheathed
cable
0.1–10 bar
6 and 3 l
Operation
Control panel
1
5
1 Orientation light
2 Odour extraction unit indicator light
3 <Small flush volume> actuator button
4 <Large flush volume> actuator button
5 <Odour extraction unit> button
0
Using the Geberit Monolith Plus
When a user approaches the sanitary
module, the orientation light lights up and
the odour extraction unit starts up.
To release a flush, press the <Large flush
volume> actuator button for a large flush or
the <Small flush volume> actuator button
for a small flush.
Starting or stopping the odour
extraction unit
Press the <Odour extraction unit>
button.
The odour extraction unit shuts off
automatically after ten minutes
(factory setting).
Result
The odour extraction unit starts or stops.
While the odour extraction unit is running,
the odour extraction unit indicator light
blinks slowly.
2
4 3
11
EN