Tools Required - Rimage Professional 3410 Manual Del Usuario

Maintain the 3410 and 5410N
3. Prepare the printer for use.
a. Install the print ribbon carrier.
b. Turn the center latch clockwise to lock it.
c. Close the printer cover. The system is ready for use.
Clean the Tacky Rollers

# Tools required:

• Sponge swabs with long handles (included in the Everest cleaning
kit)
• 99% Isopropyl alcohol
1. Remove the print ribbon carrier.
Important! The ribbon carriers cannot be removed from the printer
unless the system is powered on.
a. Lift the printer cover latch to open the cover.
b. Lower the printer cover.
c. Turn the center latch counterclockwise to unlock it.
d. Remove the print ribbon carrier.
2. Remove the print ribbon. For specific instructions, refer to the
the Print Ribbon
procedure on page 19.
Print Ribbon
Carrier
Change
Center Latch
For more information visit
3. Clean tacky roller 1 on the print ribbon carrier.
a. Remove the sponge swab and the swab handle from the Everest
cleaning kit.
b. Insert the sponge swab into the unnotched end of the swab handle,
if necessary.
c. Apply isopropyl alcohol to the sponge swab.
d. Use the sponge swab to clean tacky roller 1.
e. Use the sponge swab to remove any waxy buildup from other parts
of the print ribbon carrier.
Tacky Roller 1
Print Ribbon Carrier
4. Inside the printer, use the sponge swab to wipe tacky roller 2.
5. Prepare the printer for use.
a. Install the print ribbon on the print ribbon carrier. For specific
instructions, refer to the
19.
b. Install the print ribbon carrier in the printer.
c. Turn the center latch clockwise to lock it.
d. Close the printer cover.
The system is ready for use.
rimage.com/support
Change the Print Ribbon
procedure on page
27