Introduction; Important - Rimage Professional 3410 Manual Del Usuario

Introduction

This manual provides the information needed to configure, operate, and
maintain the Rimage Professional™ 3410 and 5410N systems. The terms
'system' and 'autoloader' may be used throughout this manual to refer to
both the 3410 and the 5410N; any differences between the 3410 and 5410N
are noted. The term 'printer' is used to refer to the integrated Everest 400
printer.
For technical information, refer to the Rimage Professional 3410 and 5410N
Specification document found at www.rimage.com/support. From the
Support page select: Professional Series > Product Name > User Manuals
tab.
Important! Your Rimage Professional 3410 or 5410N system may not look
exactly like the model featured in this user guide.
About this User Guide
• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our web
site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 7 paths. Other Windows operating system navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Tip: A Tip suggests alternative methods that may not be obvious and helps
you understand the benefits and capabilities of the product.

Important!

An Important note provides information essential to the completetion of
•
a task.
Important supplemental information.
•
You can disregard information in a Tip and still complete a task, but do
•
not disregard an Important note.
2002552_B
n
n
About the Professional 3410 and 5410N
The 3410 and 5410N are part of the Rimage Professional series of products.
The 3410 system consists of the 3410 autoloader and an integrated
Everest 400 printer. The 5410N systems consists of the 5410N autoloader,
an integrated Everest 400 printer, and an embedded control center (PC).
Information about the integrated Everest 400 printer is included in this user
guide.
An external PC must be used with the non-embedded 3410 system.
The external PC does not ship with a non-embedded system; you must
provide a PC to be used as the external control center. Refer to the Rimage
Professional 3410 and 5410N Specification document found at
com/support
The embedded PC in the 5410N is a network-ready device that receives
orders from other networked computers. You can also operate the
autoloader remotely by using Microsoft Remote Desktop Connection or
Rimage WebRSM, or locally by attaching a monitor, keyboard, and mouse.
For information about setting up and submitting orders from a networked
PC, refer to the Rimage Advanced Setup (Networking) Guide available at
www.rimage.com/support.
For more information visit rimage.com/support
Caution: A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
Warning! A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining the
equipment.
for minimum PC requirements for the 3410.
www.rimage.
1