Charging The Toothbrush - Philips HX2740/02 Manual De Instrucciones

ENGLISH
8
1
2
Directions for use: toothbrush

Charging the toothbrush

C
1
Leave the toothbrush to charge for at least 16 hours before you
use it for the first time.
The toothbrush can be put back in the charging unit after use.
If the battery in the toothbrush is being charged, the pilot light is green
(only type HX2740).
If the battery is almost empty, the pilot light is red and blinks for 10
seconds after the toothbrush has been switched off (only type HX2740).
The toothbrush can be left to charge continuously. However, to
Tip:
extend the life of the battery, it is recommended to let the toothbrush
run until it is completely empty and then fully recharge it every six
months.
How to use the toothbrush
C
1
Mount the brush head onto the toothbrush by inserting it into the
bayonet catch and turning it.This will make it impossible for the
brush head to become detached due to vibration.
C
2
Place the brush in your mouth.
C
3
Press the on/off button to switch the toothbrush on.