Dometic VacuSealer VS 1000 Instrucciones De Uso página 18

Troubleshooting
Operation Problem
Sealing The device does
not vacuum-seal.
Liquid is being
extracted.
The device vac-
uum-packs but
doesn't seal.
While vacuum-seal-
ing manually, the
device does not
vacuum-seal suffi-
ciently.
18
Possible cause Remedy
The bag is Place the open end of the
crumpled or is bag in the vacuum tray.
not placed in
The open end of the bag
the device prop-
must be smooth.
erly.
There is a hole Use a new bag.
in the bag.
The bag is not a Only use vacuum-seal
Dometic vac- bags from Dometic.
uum-seal bag.
The lid is not Close the lid until the sta-
closed properly. tus display lights up
orange.
The seals are Clean the seals.
contaminated.
The seals have Put the seals in the correct
slipped. position.
There's too Freeze liquids before
much liquid in vacuum sealing.
the bag.
The open end of Dry the open end of the
the bag is moist bag.
or wet.
The seals are Clean the seals.
contaminated.
The time Immediately after vacuum-
between vac- packing, press down the lid
uum-packing at the sides with both
and sealing is hands.
too long.
VacuSealer VS1000
EN