Using As An Audio Interface; Preparation; Connection; Monitoring - Tascam DR-07X Manual Del Usuario

Using as an audio interface

By connecting this unit to a computer (Windows/Mac) or iOS
device, you can use it as an audio interface.

Preparation

1.
Use a USB cable to connect the unit to a computer,
and turn the unit on.
micro-B USB plug
Computer
USB
The USB CONNECT screen will open.
NOTE
An Apple Lightning-USB camera adapter is necessary to
connect the unit to an iOS device
2.
Use the + and − buttons to select AUDIO I/F, and
press 7.
The AUDIO I/F screen will open.
12
TASCAM DR-07X

Connection

1.
Select the type of connected device.
Options: PC/Mac (default), iOS
NOTE
When PC/Mac is selected, the unit with operate on bus
power from the computer.
2.
Set the sampling rate.
Options: 44.1k, 48k (default)
3.
Select Exec at the CONNECT item.
When the unit connects with the external device, the USB
AUDIO I/F screen will open.

Monitoring

1.
Press the MENU button.
The MENU screen will open.
2.
Selecting the monitored signal.
Options
PC/Mac (default): Monitor the playback sound from the
PC or Mac.
DIRECT: Monitor the input sound without latency.
NOTE
i The meters can be used to check the playback sound of
the external device.
i Sound will not be output from the speaker.
i Use headphones to hear the sound.

Disconnecting

1.
Press the MENU button.
The MENU screen will open.
2.
Select Exec at the DISCONNECT item.
The recorder disconnects from the external device, and the
Home screen opens.