Steren LCD-810 Manual Del Usuario página 12

BASIC CONNECTION METHOD
1.- To connect the external antenna, insert the cable into the ANT
IN input, located in the rear side of the screen.
2.- Plug the AV converter cable to , make sure the arrow
printed in the cable aligns with the arrow printed in the connector.
3.- The yellow connector is for Video 1 input.
4.- Red connector goes to right speaker.
5.- White connector allows you to connect the left speaker.
6.- Use the black connector to connect the 12V power supply.
7.- If you want to connect an additional video source, use the
Blue connector (Video 2).
8.- The black single wire is for car rear view system.
ENGLISH-12