Other Functions
You can also control the unit (and optional CD/
MD units) with a rotary commander (optional).
Using the rotary commander
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S O U N D
M O D E
D S P L
By pressing buttons
(SOUND)
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press
(SOURCE)
(MODE)
(ATT)
(OFF)*
3
(SOUND)
(DSPL)
18
D S P L
M O D E
S O U N D
(ATT)
(MODE)
(DSPL)
(OFF)
To
Change the source
(Radio/CD/MD*
1
/AUX*
Power on
Change operation
(Radio band/CD unit*
1
/MD
unit*
1
)
Attenuate the sound
Stop playback or radio
reception/Power off
Adjust the sound settings
Change the display item
By rotating the control
Rotate and release to:
– Skip tracks.
To continuously skip tracks, rotate once
and rotate again within 2 seconds and hold
the control.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during CD (MD) playback*
– Change albums*
*1 Only if the corresponding optional equipment is
connected.
*2 Available only when an optional Sony portable
device is connected to AUX IN terminal of the unit.
2
)/
When you connect a Sony portable device and CD/
MD unit(s) at the same time, use the AUX IN
selector.
*3 If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
*4 Available only when an MP3 file is played.
SEEK/AMS
control
PRESET/DISC
control
4
.
1
.