ZONE ID SET
This function is used to allocate as many as 12 IDs to each zone area. Use Left/Right/
UP/DOWN for this purpose. You may select the ID position from the additional menu of
[LOCATION...].
ZONE AREA SET0
LOCATION
...
ZONE ID SET
...
ZONE ENABLE
ON
EXIT
QUIT
ZONE ENABLE
This function turns [ON] or [OFF] the ZONE AREA ID indication.
ZONE AREA ID 0
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789 : ! - + * () /
RET
SP▶▶ ◀◀SP LOCATION...
ZONE. 0......
9