Publicidad
Idiomas disponibles
Idiomas disponibles
SEVERE WARNING SIGNS
FOR INSTALLATION
WARNING
• Do not install this appliance near a
heater, infl ammable material.
Do not install this appliance in a humid,
oily or dusty location, in a location
exposed to direct sunlight and water (rain
drops).
Do not install this appliance in a location
where gas may leak.
-
This may result in an electric shock or fi re.
•
Do not place this refrigerator in direct sunlight
or expose to the heat from stoves, room
heaters or other appliances.
•
Do not plug several appliances into the same
multiple power board.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matched the rating plate.
-
This provides the best performance and
also prevents overloading house wiring
circuits, which could cause a fi re hazard from
overheated wires. If the wall socket is loose, do
not insert the power plug.
-
There is a risk of electric shock or fi re.
•
Do not use a cord that shows cracks or
abrasion damage along its length or at either
end.
•
Do not bend the power cord excessively or
place heavy articles on it.
•
Do not use aerosols near the refrigerator.
-
Aerosols used near the refrigerator may cause
an explosion or fi re.
• The installation or any service of this
appliance is recommended by a
qualifi ed technician or service company.
-
Failing to do so may result in an electric shock,
fi re, explosion, problems with the product, or
injury.
•
This refrigerator must be properly installed and
located in accordance with the manual before
it is used.
•
Connect the power plug in proper position with
the cord hanging down.
-
If you connect the power plug upside down,
wire can get cut off and a cause fi re or an
electric shock.
•
Make sure that the power plug is not squashed
or damaged by the back of the refrigerator.
•
When moving the refrigerator, be careful not to
roll over or damage the power cord.
-
This constitutes a fi re hazard.
DA68-02615A(0.0).indb 03
DA68-02615A(0.0).indb 03
•
The appliance must be positioned so that the
plug is accessible after installation.
• This appliance must be properly
grounded. Do not ground the appliance
to a gas pipe, plastic water pipe, or
telephone line.
-
You must ground the refrigerator to prevent
any power leakages or electric shocks caused
by current leakage from the refrigerator.
-
This may result in an electric shock, fi re,
explosion, or problems with the product.
-
Never plug the power cord into a socket that is
not grounded correctly and make sure that it is
in accordance with local and national codes.
•
Do not pull or excessively bend the power
cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal
object, place a heavy object on the power
cord, insert the power cord between objects,
or push the power cord into the space behind
the appliance.
-
When moving the refrigerator, be careful not to
roll over or damage the power cord.
-
This may result in an electric shock or fi re.
•
This appliance should be positioned in such a
way that it is accessible to the power plug.
-
Failing to do so may result in an electric shock
or fi re due to electric leakage.
•
Do not stand on top of the appliance or place
objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal
objects, etc.) on the appliance.
-
This may result in an electric shock, fi re,
problems with the product, or injury.
•
Never use gas pipes, telephone lines or other
potential lightening rods as ground.
-
Improper use of the ground plug can result in
an electric shock.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.
•
The fuse on the refrigerator must be changed
by a qualifi ed technician or service company.
-
Failing to do so may result in an electric shock
or personal injury.
Safety information _03
2012.7.11 8:41:3 PM
2012.7.11 8:41:3 PM
Publicidad
