Key Functions - Vimar ELVOX TAB 7559 Guía Rápida

TAB: 7559

Key functions

Fig. 5
T2 (AUX2 / Intercom
menu)
T1 (Self-start)
P/A (Answer / End call /
Call to switchboard)
In the subsequent sections of this document the touch keys
are designated as shown in the figure (Fig. 5):
At rest, none of the buttons perform the touch func-
tion, but must be pressed for longer (around 0.4 s): this
prevents the accidental activation of commands. Unless
specifically disabled, the recognition notice is given by
acoustic signalling.
Keys T1..T4 have two operating contexts:
• Operators
• Intercom
In the Drives context, keys T1..T4 have a default (when not
programmed), as indicated in the following figure (Table
1), along with the default icons:. They can be programmed
from the installer menu or using SaveProg.
Table 1
KEY ICON
T1
T2
T3
T4
10
MEANING
Self-start
Aux 2
F2 last outdoor unit
Aux 1
In the Intercom context keys T1..T4 have no default
configuration.
T3 has the function of ringtone mute / mute microphone.
By default, the LOCK
outdoor unit to make a call or the outdoor unit for which
self-start procedure was performed.
In standby mode, the screen is completely switched off.
(In the method described above), by activating any one of
the keys T1..T4 and LOCK
performed without switching on the display unless the
function has to do so in order to be performed, such as
self-start.
EN
C (Access Menu
configuration)
T3 (Ringtone mute / Mute
microphone)
T4 (Stair light / Actuator
menu)
Lock
key controls the lock of the last
by default the function is