Beyerdynamic IMPACTO ESSENTIAL Manual página 5

Impacto essential – High-end cable DAC & Amplifier
Compatibility notes
Windows: from Windows 7
Mac: from Mac OSX10.6.4 (limited to 192 kHz sample rate)
Android: Android 4.1 and higher with additional 3rd party drivers or media player
from Android 5.0 native support (up to 48 kHz)
Note: The hardware of the player must support USB On-The-Go (OTG).
Supplied accessories
Impacto essential
Connecting cable micro-USB to USB type A
Connecting cable micro-USB to USB type C
Connecting cable micro-USB to micro-USB (OTG)
Connection
The Impacto essential is supplied with three cables to connect to computers, tablets and smartphones.
Refer to illustration 1-1. Important: Please only use the cables supplied to connect the Impacto
essential to the hardware specified above.
Illustration 1-1
micro-USB to USB type A
Driver installation
Windows PC
Before you connect the Impacto essential to your PC for the first time, please install the appropriate
Windows driver on your PC. At www.beyerdynamic.com/ impacto-essential on the product page of the
Impacto essential you can download the appropriate driver for your Windows version. Install the driver
by following the instructions on the screen and restart the computer afterwards. After the restart
connect the Impacto to the computer. Select the Impacto essential as standard audio playback device
in your operating system.
Mac
For the operation with a Mac you do not have to install a driver. The Impacto essential works per "Plug
and Play". Please note that you have to select the Impacto essential as output device in your audio
player.
Android smartphone or tablet
When operating with smartphones and tablets with Android, it is not necessary to install a driver. The
Impacto essential works per "Plug and Play".
micro-USB to USB type C micro-USB to micro-USB (OTG)
5