Beyerdynamic IMPACTO UNIVERSAL Manual página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
Impacto universal – High-end cable DAC & Amplifier
Compatibility notes
Windows:
from Windows 7
Mac:
from Mac OSX10.6.4 (limited to 192 kHz sample rate)
Android:
Android 4.1 and higher with additional 3rd party drivers or media player
from Android 5.0 native support (up to 48 kHz)
Note: The hardware of the player must support USB On-The-Go (OTG).
iOS:
from iOS 7 (only devices with a lightning connection)
Supplied accessories
Impacto universal
Connecting cable micro-USB to USB type A
Connecting cable micro-USB to USB type C
Connecting cable micro-USB to micro-USB (OTG)
Connecting cable micro-USB to Lightning
Battery pack
Quick Start Guide
Connection
The Impacto universal is supplied with three cables to connect to computers, tablets and smartphones.
Refer to illustration 1-1. Important: Please only use the cables supplied to connect the Impacto
universal to the hardware specified above.
Illustration 1-1
micro-USB to
USB type A
Driver installation
Windows PC
Before you connect the Impacto universal to your PC for the first time, please install the appropriate
Windows driver on your PC. At www.beyerdynamic.com/ impacto-universal on the product page of the
Impacto universal you can download the appropriate driver for your Windows version. Install the driver
by following the instructions on the screen and restart the computer afterwards. After the restart
connect the Impacto to the computer. Select the Impacto universal as standard audio playback device
in your operating system.
Mac
For the operation with a Mac you do not have to install a driver. The Impacto universal works per "Plug
and Play". Please note that you have to select the Impacto universal as output device in your audio
player.
micro-USB to
USB type C
micro-USB to
micro-USB (OTG)
micro-USB to
lightning
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido