Beyerdynamic IMPACTO UNIVERSAL Manual página 9

10
Problem
Music playback interrupted,
music playback not possible.
Playback is too quiet.
Hi-Res LED is illuminated
permanently even though no
Hi-Res files are being played
back.
Hi-Res LED is not illuminated
even though Hi-Res files are
being played back.
No Hi-Res files can be played
back.
The Play/Pause and Skip to
the previous/next track buttons
are not working.
The volume buttons are not
working.
Use with iOS devices:
The Impacto does not work
and the Hi-Res LED is -
illuminated red.
Impacto universal – High-end cable DAC & Amplifier
Cause
Error during USB signal
transmission.
The maximum volume has
not been set on the playback
device.
The playback device is
performing upsampling to
Hi-Res format.
The playback device only plays
audio data that is below
48 kHz, e.g. by means of
downsampling.
No Hi-Res player app or
software is present on the
playback device.
The playback device is not
accepting the control com-
mands or is not compatible.
The Impacto is not working
properly.
The battery is completely
empty.
Solution
Disconnect the USB cable
from the Impacto and then
reconnect it. Make sure that
the processing power of the
playback device is sufficient
for playing back the Hi-Res
files.
Set the volume on the
playback device to maximum.
Deactivate upsampling in your
playback device.
If possible, adjust the setting
on the playback device. You
will find relevant information
in the instructions for the
playback device.
Download a suitable Hi-Res
player app or piece of software
to the playback device and
install the app or software.
Set the required function on
the playback device instead of
on the Impacto.
Disconnect the USB cable
from the Impacto and then
reconnect it.
Recharge the battery.