Philips Norelco 7000 Serie Manual De Instrucciones página 22

22
English
22_002_7341_1_DFU-Luxury_A6_v5.indd 22
4 Press the on/off button on the SmartClean
system to start the cleaning program.
During the cleaning phase, the cleaning
symbol flashes.
When the cleaning phase is done (after approx.
10 minutes), the cleaning symbol lights up
continuously.
When the cleaning program is done, the ready
symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, the SmartClean system
switches off automatically.
The battery symbol lights up continuously
to indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
5 To let the shaver dry, you can leave it in the
SmartClean system until your next shave.
You can also remove the shaver from the
SmartClean system, shake off excess fluid,
open the shaving unit and let the shaver air dry.
Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program stops. In this case, the cleaning or
drying symbol goes out.
Note: If you disconnect the SmartClean system
from its power source, the cleaning program stops.
24/05/17 16:17