Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
INITIAL SETTINGS
Before confi gure the equipment, make sure it is
connected to the phone set and phone line.
Setting time, and date
1.- Press Set button twice, the Year blinks in the LCD screen.
2.- Use Up / Down to set the current year. Press Set to store
the changes. Then, the month blinks.
CALLER ID
INCOMING CALLS
To review incoming calls, press Up / Down buttons. Incoming
numbers, date and time appears on LCD screen. To visualize
more telephone numbers, press Up / Down.
The Caller ID can store up to 100 incoming telephone
The Caller ID can store up to 100 incoming telephone
numbers on memory.
numbers on memory.
To receive the complete caller ID information, please pick
To receive the complete caller ID information, please pick
the phone handset up after two rings.
the phone handset up after two rings.
Erasing incoming telephone numbers:
1.- Press Up / Down to select the number that you want to
erase.
2.- Press Del button, the selected number will be erased from
the memory.
Erasing all incoming telephone numbers:
1.- Press and hold Del button for more than 2 seconds, all the
incoming calls will be erased from memory.
REVIEWING OUTGOING CALLS
To review the dialed phone numbers, press Out button. The
last dialed number displays in the screen.
Press Out once again, to visualize the elapsed call time.
If you want to visualize more stored numbers, press Out
many times as you need.
To phone line
To phone
ENGLISH-5
ENGLISH-7
3.- Repeat step 2 to enter month, day, time format (12 or 24),
hours and minutes.
4.- After you entered the correct data information, DO NOT
press any button for 3 seconds, the screen backs to normal
view and the changes are stored in memory.
5.- Use Set button to change the parameters of: Code, Flash,
Auto IP, IP, LCD screen and Pause.
6.- To confi gure one of this options, press Set once, then use
Up / Down buttons to select one item. To confi rm press Set
button.
7.- In the same way, use Up / Down buttons to change the
parameters; when you fi nish the edition, DO NOT press any
button for 3 seconds, the changes will be stored in memory.
If you have subscribed caller ID service from your local
If you have subscribed caller ID service from your local
telecom service provider and the message sent from
telecom service provider and the message sent from
telecom network is in FSK mode, the message will auto
telecom network is in FSK mode, the message will auto
adjust the Date & Time on the device.
adjust the Date & Time on the device.
The Flash option, allows you to confi gure the time while
The Flash option, allows you to confi gure the time while
you transfer a call between a phone set to other.
you transfer a call between a phone set to other.
The LCD option allows you to set the contrast of the
The LCD option allows you to set the contrast of the
screen.
screen.
A
Auto IP and IP functions are available only for IP voice
Auto IP and IP functions are available only for IP voice
systems.
systems.
Pause function helps to confi gure the device when it's
Pause function helps to confi gure the device when it's
working with a commuter.
working with a commuter.
Any dialed number in Pulse Mode will not be stored in
Any dialed number in Pulse Mode will not be stored in
OUT memory.
OUT memory.
Erasing dialed numbers:
1.- Press Out button to select the number that you want to
erase.
2.- Press Del button once, the selected number will be
deleted from memory.
Erasing all dialed numbers:
1.- Press and hold Del button for more than 2 seconds. All the
incoming calls will be erased from memory.
TROUBLESHOOTING
Trouble
Blue Light doesn't work
Caller ID doesn't work / appears
uncompleted data
ENGLISH-6
Solution
Verify batteries are correctly installed
Review the batteries charge
Assure that you have subscribed to
the service on your telecom company
Probably you answered the phone
before two rings
Make sure that you have installed
new babtteries on the telephone
Replace the batteries
ENGLISH-8
Publicidad
