Bayside Furnishings CORC-8B Instrucciones De Ensamblaje página 5

4. Pick up the Back Assembly (A) and
fit the back support under the
Mechanism (C) properly. Insert 4
Bolts (BB) through the mounting
holes on the Mechanism (C) and
securely screw into the threaded
holes on the Back Assembly (A),
using the enclosed Allen wrench.
5. Turn the assembled seat upright and
locate the centre hole of Mechanism
(C) over the Gas Lift (D). Press
down firmly until the seat locks in
place.
®
Bayside Furnishings
Assembly Instructions
Page 5
ITM. / ART. 991079
E