Bayside Furnishings CORC-8B Instrucciones De Ensamblaje página 6

1. To adjust seat height:
While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle
and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the
handle while applying more weight downward on the seat. The chair will descend until the handle is
released or the chair reaches the bottom position.
2. To operate tilt lockout:
While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle
all the way out (away from the gas lift) to allow the chair to tilt backwards. To lock the chair in the upright
or vertical position, sit upright and push the handle in towards the gas lift.
3. To adjust tension on the tilt:
Reach under the front center of the chair, grasp the round knob and turn it counter-clockwise to stiffen the
tilt mechanism. Turn the knob clockwise to loosen the tilt mechanism. Turn the knob until the desired
resistance is reached.
4. To adjust height of the armrest:
Press the buttons on the armrests to allow the armrests to move up or down freely. Release the buttons
once the desired height is reached.
®
Bayside Furnishings
OPERATING INSTRUCTIONS
Page 6
ITM. / ART. 991079
E