Marshall CODE 50 El Manual Del Propietario página 11

EDITING A PRESET
To edit PRE FX, AMP, MOD, DEL, REV, POWER and CAB section settings:
• Hold down the Section Switch that you
wish to edit (#15 - #21 in this manual).
• The display screen will then show the
current section's settings.
• Turn the EDIT selector to scroll through
the different options within the current
section: CL DSL, Plexi, JCM800, OD Silver
Jubilee in AMP, or Chorus, Flanger,
Phaser, Tremolo in MOD, or Studio,
Vintage, Multi, Reverse in DEL, for
example.
• Push the EDIT selector to begin editing.
Speaker cabinet models are not
!
editable.
• Turn the EDIT selector to edit the
highlighted parameter. You will see the
parameter value change on the screen as
you turn.
• When you are happy with your edited
parameter value, push the EDIT selector
to move to the next parameter (if there
is one).
STORING A PRESET
To store an edited Preset, Store an edited Preset to a new location, and to rename an
edited Preset:
• When you have finished editing, press & hold EXIT/STORE briefly until the Preset name
begins to auto-scroll to the left into the Preset number.
• If you wish to store your edited Preset to another location, turn the PRESET selector to
find a new location, then press & hold EXIT/STORE until STORED appears on the display
screen.
Be sure that you want to store to the Preset location that you have selected, as the Preset
!
in that location will be overwritten.
ENGLISH
• Turn the EDIT selector to edit the newly
highlighted parameter.
• Repeat for all parameters and parameter
values of the Sections that you wish to
edit.
• When you are happy with your edited
Preset you can store it to your CODE
amplifier's memory.
To learn how to store an edited Preset,
!
refer to STORING A PRESET in this
manual.
• If you wish exit without storing your edits,
press EXIT/STORE (# 22 in this manual).
This will return you to the main Preset
screen.
If you wish to keep your edited settings
!
ensure that you store before moving off
that Preset.
STORING A PRESET (CONT.)
To rename the edited Preset and store to the current location:
• While the Preset name auto-scrolls to the left, press & hold EXIT/STORE again briefly
until the Preset name is displayed with arrows above and below the first letter or
character.
• Turn the EDIT selector to change the letter or character.
• Turn the PRESET selector to move to the next letter or character, or back to a previous
letter or character.
• Repeat until you have renamed the Preset.
The Section Switches act as naming shortcuts:
NAMING SHORTCUTS
PRE FX Clear
AMP Number
MOD
Upper / Lower Case A
DEL Upper / Lower Case
REV Space
POWER
Backspace
CAB
Cancel
• To complete the store process, press & hold EXIT/STORE once more until STORED
appears on the display screen. Your edited Preset has now been stored to CODE's
memory.
BLUETOOTH
Pressing REV and POWER Section Switches together (#19 & #20 in this manual) accesses
the Bluetooth pairing function:
®
• The display screen will show 'Bluetooth, pairing enabled' and your CODE amplifier's
pairing ID.
• The blue LED on EXIT/STORE (# 22 in this manual) will flash while pairing.
• When paired, the blue LED will stop flashing and remain lit.
• When streaming audio, use the MASTER volume control or your music player to set the
volume level.
Audio streamed via Bluetooth will bypass CODE's panel features, with the exception of
!
MASTER volume.
The Marshall Gateway™ App enables you to control your CODE amplifier remotely and
access Marshall Gateway using your iOS/Android device. Download Marshall Gateway
now from the App Store or Google Play.
ENGLISH