Descargar Imprimir esta página

Kärcher 2.642-347.0 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
Start up
 Disconnect the high pressure hose of
the used high pressure cleaner from the
hand spray gun (see operating instruc-
tions of the high pressure cleaner)
Connect the end of the high pressure
hose with the hand spray gun of the tel-
escoping spray lance.
Note: A T adapter (order number 2.644-
031.0) is required for high-pressure clean-
ers without quick coupling. The T adapter is
mounted between the telescopic spray
lance and the high-pressure hose.
Mount the high-pressure hose
Illustration
 Insert the high-pressure hose into the
connection of the telescopic spray
lance until you hear it click into place.
Note: Make sure the connection nipple is
aligned correctly.
Operation
Note: Please read and observe the safety
instructions prior to use!
Illustration
Ergonomically adjust the telescoping
spray lance to the operator:
 Loosen the nut and slide the hand spray
gun into the desired position; then reat-
tach and check the fixation.
The telescoping spray lance consists of
three individually extendable pipes; pull out
the bottom pipes first for better stability.
Illustration
 Loosen the nut and extend the pipes to
the necessary length; then reattach and
check the fixation.
 Operate the high pressure cleaner as
instructed in the operating instructions.
 Turn on the high-pressure cleaner.
Illustration
 Unlock the lever on the trigger gun.
 Press the lever on the hand spray gun
and begin cleaning.
CAUTION
Risk of injury from recoil. Hold the spray
lance firmly.
10
Finish operation
 Switch off the high pressure cleaner.
Depressurise the appliance:
 Interrupt the water supply to the high
pressure cleaner
 Press the lever on the hand spray gun
to release any remaining pressure in
the system.
Illustration
 Disconnect the high pressure hose from
the telescoping spray lance and attach
it to the hand spray gun of the high pres-
sure cleaner.
Illustration
 Coil the high pressure hose, attach with
the included adhesive tape and insert
the kink protection sleeve.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
– 3
EN
Storage
Warranty

Publicidad

loading