Samsung HW-J6000R Manual Del Usuario página 12

REMOTE CONTROL BUTTONS & FEATURES
Power
SOURCE
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.

Controlling the Soundbar using Your TV Remote
Control
1. Press and hold the
the Soundbar is turned on.
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
c Not available if the TV ARC function or HDMI mode is in use.
c All buttons are not available except the VOL +/- and the
this function.
c TV menus differ by manufacturer and model. Refer to the TV's user
manual for further information.
c Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
●
GRUNDIG, Hisense, RCA
This function may not be compatible with your TV's remote
●
depending on the remote control's manufacturer.
c To turn off this function, press the
"OFF - TV REMOTE" appears on the Soundbar's display.
Turns the Soundbar on and off.
Press to select a source connected to the Soundbar.
· 12 · English
 
SOUND button for more than 5 seconds while
SOUND button for 5 seconds.
buttons in