Philips HQT562/00 Manual De Instrucciones página 5

C
2
1
C
C
CLICK
Never pull at the flexible top of the comb
attachment. Always pull at the bottom part.
2 Switch the appliance on.
3 Make well-controlled movements.Touch
the hair lightly with the trimmer.
Cleaning
Do not use abrasives, scourers or liquids such as
alcohol, petrol or acetone to clean the appliance.
1 Make sure the appliance is switched off
and disconnected from the mains.
2 Remove the comb attachment.
3 Open the cutting unit by pushing it
backwards 1.
4 Clean the cutting unit and the inside of the
appliance with the brush supplied 2.
5 Close the cutting unit by pushing it back
onto the appliance until you hear a click.
The appliance does not need to be lubricated.
Replacing the cutting unit
A worn or damaged cutting unit should only be
replaced with an original Philishave cutting unit,
available from authorised Philips service centres.
1 Open the cutting unit.
ENGLISH
7