Axis T99A Guia De Instalacion página 34

AXIS T99A Positioning Unit
6-pin configurable terminal block
Function Pin
1
0 V DC (-)
2
DC output
3–
Configurable
6
(Input or
Output)
1
0 V DC (-)
2
DC output 12 V, max 50 mA
Notes
DC ground
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
Digital input – Connect to pin 1 to activate, or
leave floating (unconnected) to deactivate.
Digital output – Connected to pin 1 when
activated, floating (unconnected) when
deactivated. If used with an inductive load, e.g. a
relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
34
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC,
open drain, 100 mA