Intended Use; Safety Informations - BGS technic 6743 Manual De Instrucciones

INTENDED USE

This tool is used for easy, fast and safe removal of brake discs with a diameter of 170 mm to 400 mm.
The puller reduces vibration impact of wheel bearings, electronic sensors, ball joints, etc..

SAFETY INFORMATIONS

• Read carefully the instructions before working with this tool.
• Do not use this tool set for other purpose for which it is designed.
• Observe the general safety instructions for garages.
• Keep your work area tidy and clean. Areas or corridors which are untidy increase the risk of
injury.
• Lifting of vehicles only allowed on the special lifting points.
• Before starting the work under a vehicle always ensure that it is adequately supported by axle
stands or ramps. Chock wheels and ensure that the hand brake is firmly applied.
• Always use approved eye protection, especially when working under vehicles.
• Ensure a secure and well-gripped stance during fitting.
• Check the condition of the tool regularly and do not use it if it is damaged.
• Make sure the tool is properly mounted.
• Do not over tighten the spindle or apply excessive force, as this may damage both the tool and
the component.
• The tool is not suitable for impact wrenches. The use of an impact wrench can rupture tool parts
and flying tool fragments can cause injury.
• This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
• Fetten Sie immer die Schraubengewinde, ehe Sie das Werkzeug verwenden.
• Keep children and other unauthorized persons away from the work area.
• Do not let children play with the tool or its packaging and keep this tool out of the reach of
children.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Brake Disc Puller
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 6743
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed