Philips FC6404/01 Manual De Instrucciones página 7

- To prevent damage, never put wax, oil, floor maintenance products
or liquid floor cleaners that are not water-dilutable in the water tank.
- Do not mix different types of liquid floor cleaner. When you have used
one liquid floor cleaner, first empty and rinse the water tank before you
add another liquid floor cleaner to the water in the water tank.
- To prevent damage, do not use liquid floor cleaners that are not
transparent or even milky.
- Never exceed the maximum quantities mentioned on the bottle
when you use a liquid floor cleaner. Do not add more than a few
drops to the water in the water tank, as this tank has a capacity of
200ml.
- Never block the exhaust air openings during vacuuming.
- Always use the vacuum cleaner with the filter unit assembled.
- Do not clean the metal strip with a sharp object, as this may damage
the strip. Only clean the strip by rinsing it under the tap. Replace the
strip when you can no longer clean it.
- Replace the strip only with an original strip. For ordering a new strip,
see chapter 'Ordering accessories'
- Clean the water tank according to the instructions. The water tank is
not dishwasher-proof.
- Make sure that the product is installed with the wall fixture mounted
to the wall, according to the instructions in the user manual.
- Be careful when you drill holes in the wall to attach the wall fixture,
to avoid the risk of electric shock.
- Maximum noise level: Lc = 84.5 dB(A)
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
Using the appliance
Using liquid floor cleaner in the water tank
If you want to add a liquid floor cleaner to the water in the water tank, make sure that you use
a low-foaming or non-foaming liquid floor cleaner that can be diluted in water. As the water tank has
a capacity of 200ml, you only have to add a few drops of liquid floor cleaner to the water.
ENGLISH
7