Würth EWS 8-115 LIGHT Traducción Del Manual De Instrucciones De Servicio Original página 21

a) Avoid
excessive contact pressure.
b) Avoid the area in front of and behind
c)
and hold it steady until the wheel has
come to a standstill.
d) Do not switch on the electric tool again
as long as it is in the workpiece. Allow
a recoil.
e) Support plates or large workpieces
to reduce the risk of a recoil caused
Special safety instructions
f) Be particularly careful when cutting
a) Do not use oversized sanding discs
-
-
a) Note that wire brushes lose pieces of
b) If a safety hood is recommended, take
Large
"pockets" in existing walls or other
surfaces that you cannot see behind.
Safety instructions for sanding
and follow the manufacturer's spec-
Safety instructions for working
wire even during normal operation. Do
care that the wire brush does not come
into contact with the safety hood. Disc
-
-
21