Parts And Components; Before Use; Product Assembly - cecotec READY WARM 9000 TWIN TOWEL Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. Left support bar A
2. Left support bar B
3. Left support bar's hole
4. Tower rack bars
5. Heating elements
6. Right support bar A
7. Right support bar B
8. Control panel
9. Wall assembly bracket A
10. Wall assembly bracket B

2. BEFORE USE

- Take the product out of the box and remove all packaging materials.
- Make sure all parts and components are included and in good conditions. If any sign of
visible damage is observed, contact immediately with our official Technical Support Service.

3. PRODUCT ASSEMBLY

The control panel must be on the bottom part of the appliance.
Safety distances:
- The distance between the bath/shower and the appliance must be, at least, 60 cm.
- The distance between the ceiling and the appliance must be, at least, 15 cm.
- The distance between the floor and the appliance must be, at least, 15 cm.
Fig. 2
Installation
1. Drill 4 holes of 8.
Fig. 3
2. Introduce 4 studs in the holes.
3. Use the ST4x40 screws to fix the outer fixing elements on the wall.
Fig. 4
4. Use the 4 ST3.5x20 screws to fix the 4 inner fixing elements and the 4 front fixing elements
to the appliance.
5. Fix the appliance's inner fixing elements into the wall's outer fixing elements and use the
READY WARM 9000 TWIN TOWEL / 9050 TWIN TOWEL STEEL / 9090 TWIN TOWEL BLACK
ENGLISH
25