Safety Instructions - cecotec READY WARM 9000 TWIN TOWEL Manual De Instrucciones

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- This product is designed only for household use. Do not use
for industrial or commercial purposes.
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec in order to avoid any type of
danger.
- Do not cover the device in order to avoid overheating.
- The installation of this appliance on the wall of a bathroom
always must be done at a distance where no person in the
shower or in the bath may reach it.
- Do not use the device directly on the floor without installing
the legs.
- Do not place the appliance close to heat sources, flammable
substances, wet surfaces or allow it to come into contact
with water or other liquids. Do not operate outdoors.
- The appliance must not be placed immediately below a
socket.
- Allow the device to operate at maximum temperature for
2-3 hours in a ventilated place in order for the device to
eliminate all manufacturing wastes.
- The product's surface will reach high temperatures during
operation. Avoid skin from getting in contact with it and use
the handle to move it.
- Always use it with the fins in horizontal position.
- Keep the packaging materials out of the reach of children,
6 READY WARM 9000 TWIN TOWEL / 9050 TWIN TOWEL STEEL / 9090 TWIN TOWEL BLACK