Technical Data; Product Description - Perles OF 9 Instrucciones

Dear Customer,
Thank you for buying a Hidria Perles, d.o.o. power tool.
Should you have any questions, vagueness or second
thoughts about our products, we recommend you to
contact our experts in Sales and Service Departments,
who will advise you and help you find the right answers to
the set questions. Please, call us on the telephone
number 01295 266 999.
Perles of Switzerland, Unit 5 Marley Way, Banbury,
OX16 2RL.
INTRODUCTION
Router is a professional power tool intended for surface
milling of wood, plastics and aluminium. It is an excellent
tool for milling templates, contours, circles and grooves,
for making finishing laths and picture frames and for
engraving inscriptions

TECHNICAL DATA

Router Type
Rated power
No load speed
Collet chuck Ø
Plunge capacity
Constant electronics
Dust extraction
Max milling diameter
Weight
Vibration level
Sound pressure level
Noise level
Protection class
The noise at work exceeds 85 dB.
Use personal protection of hearing!
Disturbances
The switching on of the machine causes a short voltage
drop. This could influence other machines if the network
conditions are unfavourable.
If the impedance of the network is lower than 0,36
disturbances are not to be expected.

PRODUCT DESCRIPTION

handle
fixing screw for parallel guide
baseplate
upper dust extraction adapter
speed control guide ( for type OF9E)
knob for fine depth adjustment
depth scale
lock-off button
switch lever
adjusting bit
wing screw
spindle lock-off button
clamp nut with a collet
hollow screw
lower dust extraction adapter
OF9 OF9E
W 1010 1300
6000 -
rpm 24000
27000
Mm 8 8
Mm 0-50 0-50
- x
x x
mm 40 40
kg 2,9 3,0
-2
m/s 3,8 <2,5
dB(A) 88 69
dB(A) 99 80
II II
3-stage chip deflector
wing screw
knob for fine depth adjustment
wing screw of parallel guide
parallel guide
fine depth adjustment screw
compasses
fork wrench
lever for fixing longitudinal movements
collet
guide bushing
guide rod
depth indicator
PACKAGE CONTENTS
Router
Parallel guide
Compasses
Fork wrench
Dust extraction adapter
Instructions for use, guarantee card
SYMBOLS
The following warning symbols are used in these
instructions:
Denotes risk of personal injury, loss of life or
damage to the tool in case of nonobservance of
the instructions in this manual.
Denotes the risk of electric shock
Double isolation
No lubrication
Cleaning
Environment protection
Symbol for separate collection of electric and
electronic waste
INSTRUCTIONS FOR SAFE USE
Read the instructions for use and safety instructions
carefully before using the tool.
Disconnect the plug before you perform any work
on the tool.
Do not use the tool if the mains lead is damaged.
If the mains lead is damaged while working, do not
touch it but immediately disconnect the plug.
Always keep the mains lead away from moving
parts of the tool.
Direct the mains lead to the rear of the tool.
Use only extension cord that is intended for
outdoor use and equipped with a splash-proof
coupling-socket. Connect the tool via a fault
current (FI) circuit breaker with a triggering current
of 30 mA maximum.
13