English - Kenwood SoupEasy+ CBL30 Manual De Instrucciones

Safety
Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
Ensure the cord is fully unwound from the cord
storage area before using the blender.
10
Do not touch the sharp blades. Handle the blades
with care to avoid injury when emptying the goblet
and during cleaning.
Always switch off and unplug the appliance before
putting your hands or utensils in the goblet whilst
fitted to the power unit.
Switch off the appliance and disconnect from
the power supply before changing accessories or
approaching parts that move in use.
The blender lid is fitted with a safety switch and the
motor will only operate if the lid is correctly fitted.
Do not attempt to operate without the lid fitted.
Never use a damaged appliance. Get it checked or
repaired: see 'Service and Customer Care'.
Never leave the appliance unattended when it is
operating.
Do not fill below the minimum levels or exceed the
maximum fill levels marked on the inside of the
goblet.
Do not use your appliance for blending for longer
than 3 minutes without a 15 minute rest period.
Processing continuously for longer periods can
damage your appliance.
CAUTION: Before removing the lid from the goblet
switch off and wait until the blades have completely
stopped.
Smoothie recipes - never blend frozen ingredients
that have formed a solid mass during freezing, break
it up before adding to the goblet.
Do not process hard spices such as Nutmeg or dried
Turmeric root as they may damage the blade.
Never run the blender empty.
2