Reset; Remote Control - Indel B Smart IN Manual De Instrucciones

Use this operating mode when maximum performance
is required for a limited time (such as when stopping in a
sunny spot to load/unload goods).
In this condition, the consumption of electricity is high
so, in order to save the battery, the maximum operating
time in this mode is limited to 2 hours.
During this operating mode, it is possible to change the
set-point and the fan speed.
To disable this operating mode, press the MAX AC button
again. The system returns to standard operating mode
and the wording MAX AC disappears on the display.
If the system is switched off during operation in MAX AC
mode, when it is switched on again, it will begin operating
in standard mode.

RESET

If the central control unit of the panel becomes blocked,
there is a procedure to allow the CPU to reload the data.
To RESET the system, press the "TIMER", "VENTILATION"
and "MAX AC" buttons at the same time; the control
panel switches off. Press the knob to switch the system
back on.
IT EN FR DE ES

REMOTE CONTROL

The remote control contains the same controls as the
panel, apart from the TIMER function.
The "ON / OFF" button switches the system on and off.
The "Mode" button activates / deactivates the MAX AC
function.
The "Temp" buttons are used to set the set-point
temperature.
The "Vent" button is used to choose the ventilation
speed.
If the timer is set (AC OFF) and the "ON / OFF" button is
pressed, the system shuts down and the timer resets; if
the timer is set (AC ON) and the "ON / OFF" is pressed,
the system switches on and the timer resets.
13/32
Smart
IN