Technical Data - Blanco BLANCOMASTER HD Manual Del Usuario

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOMASTER HD/-S Duo HD
Lever
1 1
2 Fixing Screw
2 Screw cover / Fixing Screw
Screw cover
3
Cartridge retaining ring
4 3
Cartridge
5 4
5 Base Ring
6 6 Spout retaining screw
Spout
7
Valve
7
Valve connection
8
9 8 O-rings
10 9 Plastic rings
11 Spout
Flow Straighter
12 10
Fixing stud
11
13 Base Ring
14 Control rod assembly
15 12 Fixing kit
Flexi-hose
16 13
Seal flexi-hose
17 15
Spray hose seal
18
19 Non-return valve
20 Non return valve housing
Spray hose + seal
21
Weight
22
Assembly set shower head
23
24 Plinth shower head
25 Spray hose seal
Shower head
26
Connection piece shower head
27
Perforated disc shower head
28
29 Top shower head
30 14 Stabilisation triangle

Technical data

Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure: Min. 0.5 bar / Max. 10.0 bar
Temperature: Max. 70° C
Note :
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong
Illustrations
1
2
5
6
7
further illustrations on the back fold-out flap
12
When tap has been fitted check:
tightness, movement, full jet of water
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
13
16
18
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
recommended
th is B L A N C O
Installation
Tap holes: 35 mm
- 4 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
- Connect flexi hoses
11
Rinse perlator/ jet regulator
Care
- Use soft (microfibre) cloth and mild cleaning
15
agent
- 17 Take care with hard objects
- Cleaning the perlator/ jet regulator with
20
vinegar
n s o n b u y in g
C o n g ra tu la ti o
e y o u
ta p – w e h o p
w it h it !
a re d e li g h te d
2