RiverRidge 06-175 Instrucciones De Ensamblaje página 13

STEP 10
OPTION #1
N
WALL ANCHOR
WITH SCREW
Option #1: Securing to Drywall
1. Position cabinet against wall in desired location. Using a pencil, make 2 small marks on wall through
holes on adjustable anchor brackets (O). Move cabinet away from wall and screw 2 plastic anchors (M)
into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (N) through holes on adjustable anchor brackets (O), then
tighten to plastic anchors (M).
Option #2: Securing to Drywall and Wood Stud
1. Position cabinet against wall in desired location. Insert 2 screws (N) through holes on adjustable anchor
brackets (O), then tighten through drywall and into wood stud.
*Tip: Adjustable anchor brackets (O) can be adjusted to correct distance from wall to cabinet as needed. Once
adjusted, be sure to re-tighten brackets inside cabinet for stability.
STEP 11
1. Attach left door (11) to left side panel (2) by inserting 4 screws (G) through screw holes on
hinges (F), then tighten to left door (11).
2. Attach right door (12) to right side panel (3) by inserting 4 screws (G) through screw holes
on hinges (F), then tighten to right door (12).
M
O
N
OPTION #2
DRYWALL
N
M
SCREW
ONLY
2
11
DRYWALL
WOOD
STUD
1
G
G
3
G
12
G
G
G
G
G
M
M
N
N