RiverRidge 06-175 Instrucciones De Ensamblaje página 8

STEP 3
G G
A
F
1. Screw 6 cam bolts (A) into cam bolt holes on left support board (4) and right support board (5).
2. Attach 2 hinges (F) to left support board (4) by inserting 4 screws (G) through holes on
hinges (F), then tighten to left support board (4).
3. Attach 2 hinges (F) to right support board (5) by inserting 4 screws (G) through holes on
hinges (F), then tighten to right support board (5).
STEP 4
B
C
2
1. Insert 2 wood dowels (C) into wood dowel holes on left support board (4).
2. Attach left support board (4) to left side panel (2) by inserting cam bolts into cam bolt holes and
wood dowels into wood dowel holes on left side panel (2).
3. Insert 3 cam locks (B) into cam lock holes on left side panel (2), then rotate clockwise to secure
cam bolts in place.
4. Repeat above steps to assemble right side panel (3) and right support board (5).
G G
A
F
4
4
B
C
B
G
G
A
F
5
A
C
B
A
G G
F
C
5
B
3
A
B