ENER-J K10DW Manual Del Usuario página 11

9. Instruction of Dimming Function
• K10D controller uses TRIAC components.
Supports incandescent lamp, tungsten lamp
and mostly all LED lamp which supports TRIAC
dimming. If flickering occurs during dimming, we
recommend replacing the LED lamp. Segmented
dimmers and lamps with dimmers are not
supported.
• This controller can only pair with push button
switch: after pairing is successful, quickly press
the push button switch 3 times and you will be
able adjust lamp brightness. Press the switch
once when you reach the level of brightness
desired. Also can use mobile APP or Alexa voice
control to control brightness.
• This controller has a brightness memory function.
When turn on the lamp again, it maintains the last
brightness level. If paired with multiple switches,
this controller can memorize the brightness level
of each switch.
• If you didn't press switch key to confirm the
brightness, the controller dims from the darkest to
brightest for 2 cycles, and will stop dimming when
reaching maximum brightness after 2 cycles.
10