Edit Channel List - Carbest 49899 Manual De Usuario

ENGLISH
MAIN MENU – CHANNEL SETTINGS

Edit channel list:

3. Skip:
Press p/q to navigate within the channel list. Press the BLUE button to mark a channel that
you wish to skip. A logo is displayed next to the channel name and the channel is skipped when
you switch through the channels. Press the BLUE button again to deactivate the skip function for
the selected channel. Press "MENU" to return to the main menu and save the change.
NOTE: It is possible to save the channel list to a USB flash drive and also to transfer a channel
list from a USB medium to the TV; see Configuration, page 25.
Signal information:
The signal information contains: Channel / Quality / Signal / Network / Modulation.
CI information:
If a CI module is inserted, this option displays CI information.
NOTE: The following reception types are supported: DVB-C, DVB-T / T2, DVB-S / S2.
5 V active antenna
the antenna cable. For passive antennas, switch this option off.
NOTE: Please note the specifications of your antenna.
Automatic shut-off: If no valid input signal is detected, the TV automatically switches to standby mode
after about 10 minutes.
Use the p/q buttons to select "Edit channel list". Press "OK" to enter the
menu. Use the p/q buttons to navigate through the menu.
1. Delete:
Press the RED button to delete a selected channel. A red circle is displayed
next to the channel name. Press the RED button again to confirm that you
wish to delete the name.
Press "MENU" to return to the main menu and save the change.
2. Change sequence:
Press p/q to navigate within the channel list. Press the YELLOW button
to select a channel. Now the channel is marked and you can use the p/q
buttons to move it to the desired position. Press the YELLOW button or "OK"
again to confirm the input. Press "MENU" to return to the main menu and
save the change.
Available only in DTV mode.
: Switch this option on to output a 5V supply voltage for active antennas via
60