Use Method - Panacom PA-7270 Manual Del Usuario

PA-7270 - USER MANUAL
Thanks for purchasing Panacom Telephone with Speakerphone
PA-7270. Please read this manual carefully before using this Tele-
phone, which is the best guideline offering best service.
InstalatIon
1) Put the telephone in a dry, ventilation and non-erode gas place
2) After installing the spiral cable line in the handset and the host,then
connect the line port and telecom port with straight cable line. Pick up
the handset and you will hear the echo from the exchanger or PABX. That
means the telephone is ready for use.

Use method

1. h.F
Press H.F (Handsfree function) for dialing numbers and conversation.
When new call comes,press H.F to start conversation,press it again to
end the call.
2. PaUse
During dialing, you can press pause key to make the next number has a
3.6seconds delay to active addition function when using under certain
public telephone exchanger or PABX.
3. mUte
When you are in conversation, but you don`t want the other side hear
you, you can press MUTE and hold it. The function will be off when you
release it.
4. hold
When you are in conversation, but you need the other side waiting for
some minutes and not hear voice from you,you can press HOLD. The
other side will hear the music playing. You can put the handset back to
the cradle. The music will be off for conversation when you pick up the
handset or press the H.F button.
5. Flash
When there is an engaged tone or a wrong number, you can press FLASH
key to hang up and make the next call.
6. RedIal
Pick up the handset and then press REDIAL key to dial out the last dialed
number automatically.
Pg. 3