COLUMBIA VAC OPC550 Manual De Instrucciones página 13

• – Tank filling indicator (6). The indicator will turn red when the tank is filled. The
device will signal it additionally by sound and then switch off. Empty the water tank and
put it back in the correct position.
• The TIMER button
time, press the button, until the display shows the correct value within the range "1-24".
In order to switch off the function, set the value "00" using the button
device is turned off using the button
function is signalled by the backlight. Pressing and holding the "TIMER" button will
display the room temperature on the display.
EMPTYING THE TANK
ATTENTION
Water collected in the dehumidifier tank is not suitable for drinking and must not be
allowed to come into contact with food.
Do not put the floater out of water; otherwise the device will not stop working when
the water tank fills up. Then, water will overflow, which may cause damage to the
floor.
5
• Pull the tank gently at the back of the device; the tank will slide out (fig. 6).
• Pour the water out of the tank through the opening in the lid (fig. 7).
• If the water tank is dirty, clean it with water. Do not use any acrid cleaning agents. Do not
use chemical solvent (such as benzene, alcohol, gasoline). The surface may be damaged
or even the whole case may be deformed. Do not sprinkle water
• Place the tank in the right position in the device (fig 8). Otherwise, the full tank indicator
will still light up red and the device will not be able to work.
– is used to turn the device on and off automatically. To set the
the time setting is cleared. Activation of the
6 7
. When the
8
EN|13