Howard Miller 615074 Manual De Instrucciones página 2

TIME SETTING
MONITOR
OTHER FEATURES (SEE FIGURE 4)
MONITOR: Press the MONITOR button to demonstrate the hourly chime melody.
SET: Advances the hour strike count without advancing the time shown on the clock. Hour strike may not match time shown on
clock after pressing the SET button.
RESET: Resets the next hour strike count to 6:00AM. If after at least one hour, the hour strike count does not match the time:
- set the time to 5:50 by using the Time Setting knob to rotate the hands CLOCKWISE
- press the RESET button
- set the time to the desired time by using the Time Setting knob to rotate the hands CLOCKWISE
(If setting PM time, make sure the hour hand passes through 12 o'clock noon until the desired time is shown.)
BATTERY REPLACEMENT
If the clock begins to lose time, chime weakens, or pendulum stops swinging, this is the sign of weak or exhausted batteries. Replace with
new alkaline batteries.
SET SELECTION
BATTERY
SOUND
Figure 4.
2
VOLUME CONTROL
RESET
2320996