Display Screen - Laney AUDIOHUB AH110-G2 Manual Del Usuario

MEDIA PLAYER CONTROLS
Use the onboard player for playing MP3 encoded audio tracks from SD card/USB or Bluetooth® device.
1. SD CARD SLOT: Insert your standard SD card here.
(Automatically detected on insertion, or if removed and reinserted uses smart technology to resume play from the
previous point).
2. DISPLAY SCREEN: Display track information.
a. Play or Pause indicator.
b. What device is being used: USB or SD Card.
c. Time into track.
d. "bt" is displayed when connecting to a Bluetooth Device.
3. MEMORY STICK SLOT: Connect your USB thumb drive here. If removed and reinserted, the system uses smart
technology to resume play from the previous point.
NOTE. T he USB socket is for the playback of recorded tracks only, not for charging a USB device.
4. MODE: Select the input source - SD card USB, Bluetooth/TWS with two cabinets. See page 6 for more information.
5. PLAY/PAUSE: Use this control to play or pause your MP3 music/backing track.
6. LOOP: Use this to enable/disable the looped playback modes. When using this button with an SD card or USB
thumb drive, there are 3 options:
ALL - Plays all the tracks on the root of the device in date order, then the sub folders
ONE - Plays one track repeatedly (cycle to the required track to play using NEXT button (8).
FOD - Plays all track in the current active folder.
7. PREVIOUS: Press to skip to the preceding track. A prolonged press will reduce the volume of the MP3 player.
8. NEXT: Press to skip to the next track. A prolonged press will increase the volume of the MP3 player.
CONNECT T O BLUETOOTH DEVICE:
a. Toggle through the system modes and select Bluetooth (using MODE switch (4)).
b. On your Bluetooth capable device, make sure Bluetooth is enabled. Scan down the list of available devices - search for: 'Laney Audiohub' and select.
c. Y our Audiohub enclosure is now connected to your Bluetooth device and controlled using the PLAY/PAUSE, PREVIOUS and NEXT BUTTONS.
d. Switching between a USB device and a Bluetooth device is possible, but the Bluetooth device will need to be re-selected by pressing the MODE button once.
1 2
4 5 6 7
a c
b
00:02
BT
3
8
5