Steren TEL-015 Manual De Instrucciones página 15

MOUNT
Desk:
Simply place the base unit on a flat surface.
On wall:
1. Select the desired location and mark the places to drill.
2. Insert a screwdriver into the hole of the base (A) and push the rear cover (B) to remove.
3. Insert the cable of the line through the cavity,
connect and place the cover.
4. Drill at marked spots where you want to
install the phone, place 1 anchors and insert 1
screw (do not insert it completely).
5. Lift hook mount.
6. Place the base where you previously placed
the screws until it's firmly attached.
6