Elite HG1600 Manual De Usuario página 19

Release of Adhesives
- Many adhesives can be softened with heat. Joints or excess glue can be removed
in this way.
Soft Solder
- The tool is suitable for spot welding or tube welding. The melting temperature of the weld
It must be less than 400 ° C.
Bonding and deformation of synthetic materials
- Heat synthetic materials using reciprocating movements. Use hot adhesives suitable for the
Union.
Drying
- The product can be used to dry layers of paint, binders and sealants.
Contraction
- Select the contraction hose according to the work piece and heat evenly with the spray gun
hot air.
Thawing of water pipes
- Always heat the frozen section from the edge to the center. Be very careful when heating the pipes
plastic and the joints between the pipe sections to avoid damage.
Nozzles
Warning
Risk of injury! The mouthpiece should not be replaced until the device has cooled down and
disconnected from the power grid.
> The air jet nozzle (G) protects the glass panes from heating by diverting the current from
air.
> The reducing nozzle (H) produces a precise air stream that can be used to deform materials
synthetics.
> Re ective nozzle (I) produces a at air stream that can be used to defrost
frozen water pipes.
6
Keep Working