Maintenance and Care
Always pull out the plug before cleaning the
appliance!
After use, wipe the spindrum dry with a cloth.
If dirty washing has been spun, it is necessary to
rinse the drum out with clear water in order to avoid
soiling the next load of washing.
Clean the exterior of the spin dryer with a damp
cloth and wipe it dry.
Use standard detergents only to clean the appliance.
Do not use abrasive cleaning agents.
Never use petrol or other solvent liquids.
The spin dryer requires no other maintenance.
If unexpected difficulties arise
Before contacting your dealer, check whether the
fault is due to one of the following minor causes.
The motor does not function:
Has the fuse blown?
Is there damage to the mains cable, plug or socket?
Pull out the plug before checking!
Never open the motor yourself!
Water does not flow out:
Pull out the plug! Check whether the outlet spout is
blocked by a piece of washing. Press the spin drum
from the inside against the outer casing with your
hand and remove the piece of washing.
The spin dryer does not pick up spin speed:
Please note that the spin dryer normally overcomes
a certain amount of unbalance itself when picking
up spin speed. The motor and spin drum are sus-
pended flexibly for that reason.
However, if the unbalance is too great (brought
about by incorrect loading of the spin dryer), the
machine cannot pick up spin speed.
The spin dryer "jumps":
1. Switch off the spin dryer immediately!
2. When the drum has come to a standstill, repack the
washing evenly.
3. Reload the spin dryer in accordance with the instruc-
tions given on the previous page.
11