About This Tool; Locating The Proper Solenoid Or Relay Connection Point - Innova 3630 Manual Del Usuario

ABOUT THIS TOOL

The Remote Starter Switch allows you to crank your
vehicle's engine (without starting it) from under the
hood, without the assistance of a helper. This capa-
bility provides convenience when performing many
troubleshooting and repair tasks such as compres-
sion, fuel pump, generator, starter and electrical tests
or adjusting tappets and setting ignition points. The
Remote Starter Switch is hand-actuated by a trigger
switch in the hand grip.
LOCATING THE PROPER SOLENOID OR
RELAY CONNECTION POINT
Connection of the Remote Starter Switch will vary
depending on your vehicle's make and model. You
MUST determine the proper connection point before
connecting the Remote Starter Switch. Refer to the
following guidelines to locate the correct solenoid or
relay connection point for your vehicle.
For most Ford vehicles: The starter relay is lo-
cated near the battery, on the inner fender. Ford
vehicles may use either single-terminal relays or
double-terminal relays.
For single-terminal relays: Connect one lead
from the Remote Starter Switch to the large ter-
minal to which the battery cable is connected.
Connect the remaining lead to the single small
terminal.
TRIGGER
SWITCH
If you cannot determine the correct con-
nection point using the following guidelines,
refer to your vehicle's service manual for
location.
1